Ebac DD400-P Desiccant Dehumidifier

  • 2/3 working day delivery included. Next working day + £15
  • Description
  • More Details

Specifications

Height (mm)

420

Width (mm)

400

Depth (mm)

540

Weight(kgs)

27

Voltage

230

Phase

1

Frequency(Hz)

50

Power(kW)

2.2

Current(A)

8

Process Airflow - Dry Air (m3/hr)

370

Regen Airflow - Wet Air (m3/hr)

150

Process Air Duct Size (mm)

130

Regen Air Duct Size - Wet Air (mm)

100

Rotor Wheel Speed (rph)

20

Typical Extraction(l/d)

34

Min Operating Temp (°C)

-20

Max Operating Temp (°C)

40

Features

On/Off Control

Y

Ammeter

Y

Integral Electronic Humidistat

Y

Manual / Automatic Mode Selection

Y

Hours Run Meter

Y

Fitted Main Plug

Y

Fan Speeds

1

High Capacity PTC Heater

Y

Process / Regen Air Filter

Y

Rubber Anti-Vibration Feet

Y

Dual Inlet Design

Y

Free Standing

Y

Handle

Y

Epoxy Powder Coated Chassis

Y

Inlet Duct Attachments

O

High Temperature Safety Cut-outs

Y


Ebac DD400-P

Desiccant Dehumidifier

Typical Extraction: 34L/Day
Nominal Effective Volume: 300m3
Operation down to 4%rh

The Ebac DD400-P desiccant dehumidifier has a compact, rugged, lightweight design which facilitates easy transportation by one person, and is easily accommodated within space restricted areas. The unit incorporates a PTC Heater ensuring maximum drying is immediately reached, and constantly maintained while the unit is running. The dual air inlet feature of the Ebac DD400-P, is ideal for installations where the regeneration supply air, needs to be kept separate from the process supply air.

In addition to the hours run meter, which shows the units running time, an ammeter is also incorporated in order to monitor the units drying effectiveness. Manual / Automatic control is a standard feature within the DD range of desiccant dehumidifiers, and a remote humidistat can quickly and easily be connected for automatic operation and control.

For Accessories - please call or email us to discuss your application

Brochure

Desiccant dehumidifiers perform exceptionally well when used in cooler climates, or when a low dew-point, deep drying or low humidity levels are required. Since desiccant dehumidifiers do not produce water, they will work effectively down to sub zero temperatures. Their operation is simplistic yet extremely effective and reliable. Air (Process Air) is drawn into the dehumidifier, where is passes over a wheel impregnated with Silica Gel. As the air passes over this wheel, any moisture present in the air, is absorbed into the Silica Gel wheel before leaving the dehumidifier as warm dry air. The Silica Gel wheel is continually, slowly rotating, typically at three revolutions per hour. As the wheel rotates a small portion passes through the regeneration segment. During this phase a second air stream (Regeneration Air) is heated to a high temperature before passing over the wheel. Any moisture present in the wheel is released into this air stream, this hot wet air is then exhausted outside the area being dried.

The EIP range of DD desiccant dehumidifiers are all manufactured from a high grade stainless steel, ensuring a rust free product when used in the most sever of applications The spigot connectors allow quick and easy installation All models incorporate a high efficiency patented PPS Rotor. This design incorporate a 82% active Silica Gel to ensure optimum performance over the equipments wide operating range of environments. All desiccant rotors supplied by EIPL are washable, and designed for high performance and long life.