Ebac Desiccant Dehumidifier Accessories

For any of the Ebac Desiccant range you will generally require the use of high temperature flexible ducting for the wet air outlet, though rigid ducting could be used if preferred. It is advisable to keep your ducting length as short as possible to maximise efficiency.

Please refer to the PDF's for a better understanding of the accessory and installation methods & requirements.

Ebac DD200 Installation - Ebac DD200 General Assembly
Ebac DD300 Installation - Ebac DD300 General Assembly
Ebac DD400 Installation - Ebac DD400 General Assembly

!

DD200 Process Air Duct Adaptor Plate

This adaptor is required if using flexible or rigid ducting to draw air from the space to be dehumidified. 

DD300 Process Air Duct Adaptor Plate

This adaptor is required if using flexible or rigid ducting to draw air from the space to be dehumidified. 

DD400 Process Air Duct Adaptor Plate

This adaptor is required if using flexible or rigid ducting to draw air from the space to be dehumidified. 

DD400 Regeneration Air Duct Adaptor Plate

102mm air duct adaptor plate for the regeneration air inlet on a DD400. This is required if you wish to bring fresh air into the DD400 to help with the dehumidification process and replace the hot wet air that is discharged externally to the space.

70mm I/D Hose for DD200/300 wet air out

A 70mm I/D hose is required for the DD200 & DD300. This is the wet air outlet to discharge the wet air externally. The hose is designed for high temperature air and is available per metre. Hose attachment clips are not provided. A 2m maximum length is recommended.

102mm I/D Hose for DD400 wet air out

A 102mm I/D hose is required for the DD400. This is the wet air outlet to discharge the wet air externally and for external air to be ducted from the outside to increase the efficiency of the larger machine. The hose is designed for high temperature air and is available per metre. Hose attachment clips are not provided. A 2m maximum length is recommended.

127mm I/D Hose

A 127mm I/D hose is required for the DD200, DD300 & DD400. This is for the internal air outlet and return air inlet within the dehumidified space. The hose is designed for high temperature air and is available per metre. Hose attachment clips are not provided